Hinged Rooflights > GV Manual Access Hatch Rooflight

Gallery (Click to enlarge)

Introduction
The Manual Access Hatch rooflight product is a simple thermally broken manual hinged skylight. The product has been designed with the option of incorporating either a double glazed unit or a powder coated insulated panel. Gas struts make operation simple and efficient and assist in keeping the rooflight stable once open.

Features
Simple single latch operation
Fully openable to approximately 85 degrees
Gas struts make stable once in open position
Gas struts assist in simple operation
Flush glazing or insulated panel
No power required

Options
Choice of:
Glazed 32mm double glazed unit (specific glass types can be catered for)
OR 31mm powder coated Insulated Panel

Both glass and insulated panel are flushbonded giving a smooth transition between glass/panel and lid.

Specifications
MANUAL ACCESS HATCH
Sizes available:
900mm x 900mm (hinged side)
900mm x 1200mm (hinged side)
1200mm x 1200mm (hinged side)
1200mm x 1500mm (hinged side)

Please note that sizes refer to overall weathered upstand dimensions.

Double Glazed Unit comprising of 6mm inner and outer panes with 20mm Argon cavity as standard.

Insulated panel consists of 25mm polyfoam insulation sandwiched between 3mm aluminium inner and outer skins.

Weight - 40Kg per square metre (guide weight only)

Colour- All our VisionVent rooflights are Powder coated to RAL7015 Grey Outer and RAL9010 White Inner, alternative paint specifications are available however these can affect both price and lead times.
Ritec Coating- Those clients looking for easy clean glass can use a ritec coating on the glass to achieve a non stick service and reduce cleaning intervals please ask for details on quotation. Ritec ClearShield protected glass:- Is always easier to clean and keep clean, Stays cleaner for longer, Resists staining and discoloration.
Warranty– The VisionVent Rooflight comes with a standard 5 year warranty

Installation
Installation onto prepared roof apertures and up-stands is simple, each rooflight is supplied assembled, packaged with instructions and fitting kit. Either follow our detailed assembly instructions, or opt for an installation service by one of our regional fitting teams.

All standard sizes are factory pre-assembled and delivered in one completed unit. An on site lifting facility will be required to locate the heavier units to the roof location.

Please remember when requesting a quote specify the outside dimensions of the upstand/kerb, you should then make an allowance of approximately 200mm for inside dimensions subject to chosen internal finishes dimension.

Resources
CAD Drawings [For registered users only]
Request a Quote
National Building Specifications (NBS)